How to Clean Shoelaces So They Look New Again

Quick answer

Clean Shoelaces So They Look New Again requires a material-aware routine: begin by removing loose dirt while the shoe is dry, then use minimal moisture and a cleaner appropriate for the surface. Work gradually, wipe away residue, and let the shoe dry naturally away from direct heat.

Why a careful approach works

Most cleaning damage happens when a shoe is oversaturated or scrubbed too aggressively. Different panels can react differently to water, brushes, and cleaning products. Before using any liquid, look at the shoe’s construction and care label. If it combines several materials, clean each one with the gentlest appropriate method.

A useful rule is to start with dry cleaning, then use a light amount of foam, then repeat only if necessary. This gives you control over the result and reduces the chance of rings, texture changes, color transfer, or softened adhesive.

What you will need

Prepare a small bowl, mild cleaner, a soft brush, towel, and fresh water. Place a towel beneath the shoe and work in a bright, ventilated area. Keep a separate dry cloth nearby so you can remove moisture as you go.

Step-by-step method

1. Inspect the shoe. Identify the material and check for loose stitching, cracked coatings, or existing damage.
2. Remove loose dirt. Take out laces and insoles where possible, then brush dry debris away.
3. Test first. On colored or delicate materials, test the cleaner on an inconspicuous edge.
4. Use controlled moisture. Remove laces, brush away dry grit, soak briefly in mild solution, rub gently or brush stubborn areas, rinse thoroughly, press with a towel, and air-dry flat.
5. Remove residue. Wipe the treated surface with a clean lightly damp cloth, then blot dry.
6. Air-dry completely. Reshape with plain paper if needed and wait until all moisture is gone before wearing or storing.

Common mistakes

Avoid bleach on colored laces, twisting wet fibers, and relacing before the laces dry. More cleaning product is not necessarily better. If dirt remains after a light first pass, let the shoe dry, reassess the material, and repeat only the smallest necessary step.

Make the result last

Regular low-effort maintenance prevents deep stains. Brush away dry dirt after use, wipe small marks promptly, and store shoes away from heat and direct sunlight. If you use a protectant, choose one made for the exact material and apply it only to clean, dry footwear.

Frequently asked questions

Can I use a washing machine? Unless the manufacturer explicitly permits it, hand cleaning is safer. Machines can affect foam, glue, shape, and color.

When should I stop? Stop if dye transfers heavily, material peels, or stitching loosens. Delicate or valuable footwear may need professional assessment.

For a complete tools overview, see our shoe-cleaning kit guide.

Keep learning

Explore the complete shoe-cleaning guide for the next steps, tools, and related material-specific guides.